Description
Duality trucks are dual pivot trucks; this version fits mountainboard decks. The dual pivot design removes any unwanted slop. This along with the rakeless hangers gives you exceptional stability.
The listing is for 5 degree baseplate for the front and -15 degree baseplate for the rear. Recommended final angle is 35 front and 15 rear. (3D printed 5 degree wedges included to fine tune to desired ride feel). This gives you a stable, deep carve setup.
The use of skate bushings gives you a lot of room of adjustability. Adjust pretension with a standard skate tool in seconds.
The ends of the hanger uses a standard profile of 22mm x 22mm with radius 6mm to fit many off the shelf gear drives and belt drives. Axle is 12mm in diameter, 68mm in length with 7/16-20 nuts.
- 5 degree front and -15 degree rear baseplates
- 270mm and 300mm hanger option available
- Custom Riptide pivot tubes
- The extended front baseplate option is now standard due to it having better truck ground clearance while still having the same low standing platform ride height as the original.
Stan (verified owner) –
Amazing trucks! The ride feel of the trucks is similar to channel trucks, however, due to the design, there is no slop. This has resulted for me, an extremely tight turning radius while still being able to maintain speed up to 30mph+ with no wobbles. The customer service is also second to none, Tito really took care of me for installation and anything I wasn’t clear on! 10/10 trucks, highly recommend to any person looking to upgrade from channel trucks or do an MTB deck build!
Tucker –
The best esk8 trucks that exist right now, highly recommend. Deep carving at lower speeds with rock solid stability at high speeds. I built a new board from scratch just to just be able to ride with these trucks on a regular basis. They’re that good.
Incredible drop-in upgrade for any board with channel trucks. They have nearly all the benefits on 3-links, without any of the maintenance. Highly tuneable using standard skate bushings, and they respond incredibly well to wedge plates.
Community forum post;
https://forum.esk8.news/t/duality-trucks-by-tito-systems-us/82466
I documented my build here;
https://forum.esk8.news/t/nothing-fancy-a-tito-duality-truck-build/83499